vlmt3100 www.vishay.com vishay semiconductors rev. 1.2, 15-mar-11 1 document number: 81710 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 low current smd led plcc-2 description these new devices have been designed to meet the increasing demand for low current smd leds. the package of the vlmt3100 is the plcc-2 (equivalent to a size b tantalum capacitor). it consists of a lead frame which is embedded in a white thermoplast. the reflector inside this package is filled up with clear epoxy. product group and package data ? product group: led ? package: smd plcc-2 ? product series: low current ? angle of half intensity: 60 features ? smd led with exceptional brightness ? compatible with automatic placement equipment ? eia and ice standard package ? compatible with infrared, vapor phase and wave solder processes according to cecc ? available in 8 mm tape ? low profile package ? non-diffused lens: excellent for coupling to light pipes and backlighting ? very low power consumption ? luminous intensity ratio in one packaging unit i vmax. /i vmin. ? 1.6 ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? automotive: backlighting in dashboards and switches ? telecommunication: indicator and backlighting in telephone and fax ? indicator and backlight fo r audio and video equipment ? indicator and backlight for battery driven equipment ? small indicator for outdoor applications ? indicator and backlight in office equipment ? flat backlight for lcds, switches, and symbols ? general use note (1) driving the led in reverse direction is suitable for short term application 19225 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. vlmt3100-gs08 red 0.28 1.1 - 2 612 - 625 2 - 2.2 2.9 2 gaasp on gap VLMT3100-GS18 red 0.28 1.1 - 2 612 - 625 2 - 2.2 2.9 2 gaasp on gap absolute maximum ratings (t amb = 25 c, unless otherwise specified) ? vlmt3100 parameter test condition symbol value unit reverse voltage (1) v r 6v dc forward current i f 7ma surge forward current t p ? 10 s i fsm 0.5 a power di ssipation p v 20 mw junction temperature t j 100 c operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 40 to + 100 c soldering temperature t ? 5 s t sd 260 c thermal resistance junction/ambient mo unted on pc board (pad size > 16 mm 2 )r thja 500 k/w
vlmt3100 www.vishay.com vishay semiconductors rev. 1.2, 15-mar-11 2 document number: 81710 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmax. /i vmin. ? 1.6 note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. ? the above type numbers repres ent the order groups which include only a few brightness groups. only one group will be shipped on each reel (there will be no mixing of two groups on each reel). in order to ensure availability, single brightness groups will no t be orderable. ? in a similar manner for colors where wavelength groups are measured and binned, single wave length groups will be shipped on any one reel. ? in order to ensure availability, singe wavelength groups will not be orderable. typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - relative luminous intens ity vs. angular displacement optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? vlmt3100, red parameter test condition symbol min. typ. max. unit luminous intensity (1) i f = 2 ma i v 0.28 1.1 - mcd dominant wavelength i f = 2 ma ? d 612 - 625 nm peak wavelength i f = 2 ma ? p - 635 - nm angle of half intensity i f = 2 ma ? - 60- deg forward voltage i f = 2 ma v f -2.22.9v reverse voltage i r = 10 a v r 615- v junction capacitance v r = 0 v, f = 1 mhz c j -50-pf luminous intensity classification group luminous intensity (mcd) min. max. c1 0.28 0.36 c2 0.36 0.45 d1 0.45 0.56 d2 0.56 0.71 e1 0.71 0.90 e2 0.9 1.12 f1 1.12 1.4 f2 1.4 1.8 g1 1.8 2.24 g2 2.24 2.8 0 2 4 6 8 10 i f - forward current (ma) 95 10842 100 80 60 40 20 0 t amb - ambient temperature (c) 0.4 0.2 0 95 10319 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative luminous intensity ? - angular displacement
vlmt3100 www.vishay.com vishay semiconductors rev. 1.2, 15-mar-11 3 document number: 81710 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - forward current vs. forward voltage fig. 4 - relative luminous in tensity vs. ambient temperature fig. 5 - relative luminous intens ity vs. forward current/duty cycle fig. 6 - relative luminous intensity vs. forward current fig. 7 - relative intensity vs. wavelength 0.1 1 10 100 v f - forward voltage (v) 95 10050 i f - forward current (ma) red t p /t = 0.001 t p = 10 s 5 4 3 2 0 1 0 95 10051 20 40 60 80 100 i v rel - relative luminous intensity i f = 2 ma 0 0.4 0.8 1.2 1.6 2.0 t amb - ambient temperature (c) red 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 95 10321 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t 2.0 i v rel - relative luminous intensity red 0.01 0.1 1 10 100 95 10061 i f - forward current (ma) i v rel - relative luminous intensity 100 10 1 0.1 red 590 610 630 650 670 0 0.2 0.4 0.6 0.8 1.2 690 95 10040 - wavelength (nm) 1.0 red i v rel - relative luminous intensity
vlmt3100 www.vishay.com vishay semiconductors rev. 1.2, 15-mar-11 4 document number: 81710 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters method of taping/polarity and tape and reel smd led (vlm.3-series) vishays leds in smd packages are available in an antistatic 8 mm blister tape (i n accordance with din iec 40 (co) 564) for automatic compo nent insertion. the blister tape is a plastic strip with impressed component cavities, covered by a top tape. taping of vlm.3... fig. 8 - tape dimens ions in mm for plcc-2 20541 mounting pad layout 1.2 2.6 (2.8) 1.6 (1.9) 4 4 area covered with solder resist 3.5 0.2 3 + 0.15 1.75 0.1 0.9 2.8 0.15 ca pin identification 2.2 ? 2.4 technical drawings according to din specifications drawing-no.: 6.541-5067.01-4 issue: 5; 04.11.08 adhesive tape component cavity blister tape 94 8670 1.85 1.65 4.0 3.6 3.6 3.4 2.05 1.95 1.6 1.4 4.1 3.9 4.1 3.9 5.75 5.25 8.3 7.7 3.5 3.1 2.2 2.0 0.25 94 8668
vlmt3100 www.vishay.com vishay semiconductors rev. 1.2, 15-mar-11 5 document number: 81710 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 reel package dimension in millimeters for smd leds, tape option gs08 ? (= 1500 pcs.) fig. 9 - reel dimensions - gs08 reel package dimension in millimeters for smd leds, tape option gs18 ? (= 8000 pcs.) preferred fig. 10 - reel dimensions - gs18 soldering profile fig. 11 - vishay lead (pb)-free reflow soldering profile (acc. to j-std-020) fig. 12 - double wave soldering of opto devices (all packages) 180 178 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 14.4 max. 10.0 9.0 120 94 8665 identification label: vishay type group tape code production code quantity 321 329 identification 4.5 3.5 2.5 1.5 13.00 12.75 62.5 60.0 14.4 max. 10.4 8.4 120 18857 label: vishay type group tape code production code quantity 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperature (c) 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 19885 ir reflow soldering profile for lead (pb)-free soldering preconditioning acc. to jedec level 2a max. 2 cycles allowed 255 c 235 c to 260 c 2 k/s ca. 200 k/s second wave first wave 5 s full line: typical dotted line: process limits time (s) temperature (c) lead temperature 300 250 200 150 100 50 0 0 50 100 150 200 250 948626-1 ttw soldering (acc. to cecc00802) 100 c to 130 c forced cooling ca. 2 k/s ca. 5 k/s
vlmt3100 www.vishay.com vishay semiconductors rev. 1.2, 15-mar-11 6 document number: 81710 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bar code product label (example) a. type of componenent b. manufacturing plant c. sel - selection code (bin): ? e.g.: j1 = code for luminous intensity group ? 3 = code for color group d. date code year/week e. day code (e.g. 1: monday) f. batch no. g. total quantity h. company code dry packing the reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. final packing the sealed reel is packed in to a cardboard box. a secondary cardboard box is used for shipping purposes. recommended method of storage dry box storage is recommended as soon as the aluminum bag has been opened to preve nt moisture absorption. the following conditions should be observed, if dry boxes are not available: ? storage temperature 10 c to 30 c ? storage humidity ? 60 % rh max. after more than 672 h under these conditions moisture content will be too high for reflow soldering. in case of moisture absorptio n, the devices will recover to the former condition by drying under the following condition: 192 h at 40 c + 5 c/- 0 c and < 5 % rh (dry air/nitrogen) or ? 96 h at 60 c + 5 c and < 5 % rh for all device containers or ? 24 h at 100 c + 5 c not suitable for reel or tubes. an eia jedec standard jesd22 -a112 level 2a label is included on all dry bags. example of jesd22-a1 12 level 2a label esd precaution proper storage and handling pr ocedures should be followed to prevent esd damage to the devices especially when they are removed from the antistatic shielding bag. electro-static sensitive devices warning labels are on the packaging. vishay semiconductors standard ? bar code label the vishay semiconductors st andard bar code labels are printed at final packing areas. the labels are on each packing unit and contain vishay semiconductors specific data. 106 37 vishay a h bc d e f g 20126 aluminum bag label reel 15973 l e v e l caution this bag contains moisture ? sensitive devices 1. shelf life in sealed bag 12 months at <40c and < 90% relative humidity (rh) 2. after this bag is opened devices that will be subjected to infrared reflow, vapor - phase reflow, or equivalent processing (peak package body temp. 260c) must be: a) mounted within 672 hours at factory condition of < 30c/60%rh or b) stored at <1 0% rh. 3. devices require baking before mounting if: a) humidity indicator card is >10% when read at 23c + 5c or b) 2a or 2b is not met. 4. if baking is required, devices may be baked for: 192 hours at 40c + 5c/ - 0c and <5%rh (dry air/nitrogen) or 96 hours at 605 o cand <5%rh for all device containers or 24 hours at 1005c not suitable for reels or tubes bag seal date: ______________________________ (if blank, see bar code label) note: level defined by eia jedec standard jesd22 - a113 2a 19786
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
